Home Lifestyle Best Chemical Drain Cleaners for 2024

Best Chemical Drain Cleaners for 2024

3
0


For this rundown, I headed to CNET’s product testing lab in Louisville, Kentucky to conduct a comprehensive batch distillation experiment with eight of the most commonly used chemical drain cleaners on the market. My primary objective was to determine the efficiency of each product in dissolving various types of clogging materials, including organic matter, grease, paper products and pet hair (the same pet hair we use for our robot vacuum tests, as a matter of fact). Throughout the experiment, I also noted the pH levels of the cleaning solutions when mixed with water and monitored any temperature changes. Furthermore, I considered the chemical composition and versatility of use of each product when comparing them to one another.

Acids vs. bases

Before conducting experiments with these substances, I separated them into acids and bases. As you may recall from high school chemistry, acids are compounds that donate a hydrogen ion (H+) when mixed with water and have a pH lower than 7. On the other hand, bases are compounds that accept those ions (or hydroxide, OH- ions) and have a pH higher than 7. Understanding this distinction is crucial, due to two important factors associated with these products: corrosivity and causticity.

Corrosivity refers to the potential of a chemical substance to cause rust and deterioration of the materials that make up your piping system. Causticity, on the other hand, relates to how a chemical substance reacts when it comes into contact with organic matter, specifically breaking down proteins and other organic molecules, which can lead to tissue destruction or chemical burns.

To determine the acidity or basicity of each compound, we measure their pH. In simple terms, the more acidic or basic a compound is, the greater its potential for corrosivity and causticity.

whatsapp-image-2023-06-13-at-2-21-24-pm whatsapp-image-2023-06-13-at-2-21-24-pm

Sample pH reading from one of our test subjects. 11.38 pH corresponds to an alkaline solution. 

Gianmarco Chumbe/CNET

Acidic drain cleaners, particularly those with high acid concentrations like sulfuric acid drain cleaners, are more hazardous compared to their basic or alkaline counterparts. In chemistry, the order of addition does matter. Normally, you would gradually introduce an acid to water, slowly increasing the concentration of the acid. Never add water to an acid as this reaction is known to generate a significant amount of heat and release hazardous fumes. See for yourself in the GIF below (and don’t try this at home). 

Adding water into this beaker of sulfuric acid creates an immediate exothermic reaction, boiling the water on contact and releasing hazardous smoke into the air. Do not try this at home!

Gianmarco Chumbe/CNET

To ensure safety during the experiments, I took necessary precautions by wearing personal protective equipment, including safety goggles, gloves, long-sleeved clothing and a mask. The dissolution test was conducted in a well-ventilated laboratory area to minimize exposure to any hazardous fumes that may be released.

Dissolution test

To begin the experiment, I weighed specific amounts of the clogging materials into separate 1,000 ml beakers:

  • 4 grams of hair
  • 20 grams of organic matter (10 grams each of apple peels and carrot peels)
  • 40 grams of lard for grease
  • 14 grams of paper products (7 grams each of toilet paper and paper towels)

Using a graduated cylinder, I carefully measured and added 200 ml of each basic drain cleaner and 70 ml of each acidic drain cleaner to the respective beakers, stirring the mixtures with a glass rod and ensuring thorough mixing without spills. Following the instructions provided with each product, I allowed the solutions to sit for the recommended time, typically between 15 and 30 minutes.

A crucial step in my test was the inclusion of water, a component often overlooked in similar experiments found online. Chemical drain cleaners are designed to work in the presence of water, which facilitates the transportation of the cleaner to the clogs and evenly distributes the solution over their surfaces, enabling the dissolution process. After the designated time had elapsed, I added tap water to each beaker containing the cleaner solutions and clogging materials. For basic drain cleaners (pH > 7.0), I used 500 ml of hot water at 46 degrees C, while for acidic drain cleaners (pH < 7.0), I used 700 ml of cold water at 19 degrees C.

To allow sufficient time for the chemicals to work, I left the samples to sit overnight and resumed the evaluation the following morning. By this point, the samples had transformed into sludgy, slimy mixtures.

An array of 8 beakers containing clog substances and drain cleaners on a counter. An array of 8 beakers containing clog substances and drain cleaners on a counter.

Hair dissolution test in progress

Gianmarco Chumbe/CNET

To proceed with the experiment, I employed a vacuum filtration process using a Buchner funnel connected to a 1,000 ml filtering flask equipped with a pump. The contents of each beaker were carefully poured into the funnel while the pump was activated. Once most of the chemical drain cleaner had been drawn out of the funnel, I performed a water wash to remove any residual chemicals from the surface of the debris samples, ensuring that only wet solids remained in the Buchner funnel. 

Our Buchner funnel, made of chemically resistant borosilicate glass, featured a perforated plate with 2-millimeter openings, allowing only the tiniest particles to pass through. In my test logic, “if a substance, solid or liquid, could pass through the 2 mm openings in the filter, it was highly unlikely to cause pipe clogging.”

Two images show a vacuum filtration setup in the CNET product testing lab. Small amounts of drain cleaner mixed with water and various types of dissolved solids are passed through a funnel plate to see how effectively the drain cleaners dissolve clogs. Two images show a vacuum filtration setup in the CNET product testing lab. Small amounts of drain cleaner mixed with water and various types of dissolved solids are passed through a funnel plate to see how effectively the drain cleaners dissolve clogs.

On the left, our vacuum filtration setup. Liquid and dissolved solids pass through 2mm holes in the Buchner funnel plate on the right — anything that doesn’t pass through is considered potential clog material.

Gianmarco Chumbe/CNET

Finally, I separated the samples and subjected them to a fan-drying process for a few hours to evaporate any remaining water from the wash. I recorded the final weight of each sample and compared it to its initial weight. The ratio of the final weight to the initial weight provided us with the dissolution efficiency of each drain cleaner product.





Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here